Safety switch elevator component 
·Double-insulated       
·Thermoplastic enclosure
·30 mm x 64 mm x 30 mm
·Good resistance to oil and petroleum spirit
·1 Cable entry M 20 x 1.5
·Actuator heads can be repositioned by 4x 90°
1. Actuating element: offset roller lever (Z11-T1R 236 ) or plunger (Z11-TS236)
2. Enclosure material: Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
3. Material of the contacts, electrical:  Silver
4. Wide range of alternative actuators
5. Action type: momentary or self-latching
Good resistance to oil and petroleum spirit
Mechanical life, minimum :20,000,000 Operations 
Actuating force, minimum :9 N 
Positive break force, minimum :19 N 
Actuating speed, minimum:160 mm/min 
Actuating speed, maximum :1 m/s 
Note (Actuating speed): Actuating speed with actuating angle 30° to switch axis
Note Bounce duration :Bounce duration in accordance with actuating speed 
Note (Switchover time) :Switchover time in accordance with actuating speed 
Terminal Connector: Screw Connection
Rated impulse withstand voltage: 6kv
Thermal test current:10 A
Required rated short-circuit current to EN 60947-5-1: 1,000 A
Utilisation category AC-15:   230 VAC
Utilisation category AC-15:   4 A
Utilisation category DC-13:   24 VDC
Utilisation category DC-13:   1 A
Switching element: NO contact, NC contact